Home / Counties / North Carolina / Randolph County

Randolph County Heating & Cooling Services

Randolph County heating and cooling, county by county: 782 square miles of North Carolina lying south of the Greensboro metro's centre, 12 ZIP codes, and a climate record read from PIEDMONT TRIAD INTL AP, NC US. TempReach USA connects you with an independent local HVAC technician; this page sets out the county's own figures.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

782
Square miles of land
12
ZIP codes in the county
3,500
Heating degree days
1,552
Cooling degree days

Randolph County heating & cooling, in brief

The short version of this page: Randolph County runs to 782 square miles, its weather is the record kept at PIEDMONT TRIAD INTL AP, NC US — 3,500 heating degree days, 1,552 cooling degree days — and its systems live under a heating pressure. One call to TempReach USA, a referral service rather than an HVAC company, connects you with an independent local HVAC technician serving the county.

The Randolph County climate record

Every climate number on this page comes from one record: the NOAA 1991-2020 normals at PIEDMONT TRIAD INTL AP, NC US, the primary metro's station, read here for Randolph County. The record's shape is 3,500 heating degree days set against 1,552 cooling degree days, 43.95 inches of precipitation in an average year, 33.3 days reaching 90 degrees or above and 68.4 nights at or below freezing, with an average temperature of 59.6 degrees across the year.

The heating season also has an address pattern in Randolph County. Its 12 ZIP codes divide 782 square miles into service ground where the same January night lands on older streets, subdivisions and edge communities at once, and the county's position — south of the Greensboro metro's centre, roughly 24 miles from the metro's centre — shapes which parts of the county feel the Greensboro metro's cold at full strength. The systems answer accordingly: one long heating season, read ZIP by ZIP, with the oldest furnaces and heat exchangers carrying the heaviest share of it.

Set the county inside its metro and the picture completes. Randolph County answers to the Greensboro metro's data — its housing profile, its problem ranking, its climate station — but the county is where that data touches ground: 4 communities, 12 ZIP codes, one county's worth of systems ageing under the record kept at PIEDMONT TRIAD INTL AP, NC US. This page is that ground-level reading, kept separate from the metro page so the local detail is never averaged away.

A ZIP code in Randolph County is a small climate-and-housing district of its own. The county's 12 codes — 27203, 27205, 27233, 27248 among them — all read the same normals from PIEDMONT TRIAD INTL AP, NC US, yet the systems inside them were installed in different decades, serve different house sizes, and fail in different orders. That is why this page prints the whole list rather than a summary: the codes are the finest division of the county the data supports, and they are the division the work itself follows.

There are 2 counties on Randolph County's neighbour list, Guilford County, Rockingham County among them, and the list is a reminder that a county page is a slice of a continuous map. The slice is worth keeping separate: this county's land area, its ZIP codes and its communities are its own, and its heating and cooling pressure — the heating profile described above — lands on its own housing. But the slice only makes full sense beside its neighbours, whose pages are linked from this one for exactly that reason.

The county's year divides by load. At one end, 33.3 days at 90 degrees or above pull the cooling season into its long peak; at the other, 68.4 nights at or below freezing do the same for heating; between them sit the shoulder weeks when neither plant runs hard. An average temperature of 59.6 degrees at PIEDMONT TRIAD INTL AP, NC US is what those two ends average out to, and 43.95 inches of precipitation spread across the year decide how much of the cooling season is also a moisture season. Randolph County's households plan around that division — service ahead of the taller peak, filters and checks in the shoulders — whether they name it or not.

Communities and housing in Randolph County

There is a practical reason this page names Randolph County's communities one by one. A heating or cooling system belongs to a house, a house belongs to a community, and the community's building decade is the strongest single clue to what the system will need — the 4 places recorded here, from Asheboro through Randleman and beyond, each carry that clue in their streets. The metro data on the Greensboro page describes the whole region; this list is where the description becomes local.

The housing behind Randolph County's systems is the Greensboro metro's housing, read at county scale. The largest single share of the metro's homes was built between 1980 and 1999 — 30.9% of the stock — with 43.4% of homes predating 1980 and 25.7% arriving since 2000, around a median build year of 1985. Inside the county those eras divide by community and by street, but the proportions set the diary: a stock weighted to between 1980 and 1999 produces the service patterns of that era's systems, ducts and insulation, in this county as across the metro.

There is a reason the coverage on this page is described county-first. Heating and cooling demand is generated house by house, and houses sit in counties: in Randolph County's case, across 782 square miles that hold 4 listed communities and 12 ZIP codes, south of the Greensboro metro's centre. The metro frame matters — the station, the housing eras, the problem ranking all come from it — but the county is where the frame touches the ground, and the ground is where the systems are.

Metro areas covering Randolph County

City pages carry the metro-wide homework — housing eras, the problem ranking, services in depth. This county sits inside their coverage.

Heating & cooling services in Randolph County

Communities in Randolph County

Asheboro

Population 27,353

Archdale

Population 11,992

Trinity

Population 7,066

Randleman

Population 4,611

Randolph County ZIP codes

27203, 27205, 27233, 27248, 27263, 27298, 27316, 27317, 27341, 27350, 27355, 27370

Neighbouring counties

Randolph County heating & cooling questions

Which communities in Randolph County, North Carolina does TempReach USA cover?
The county entire, as this page draws it: 782 square miles in North Carolina, the communities in the list above, and the 12 ZIP codes recorded for Randolph County, North Carolina. Coverage here is the county page's own subject — find your community or your code, and the routing takes a single call. Entered under Randolph County, North Carolina's name, the place ledger runs, populations attached: Asheboro 27,353; Archdale 11,992; Trinity 7,066; Randleman 4,611. On the county's own record, the neighbor ledger names: Guilford County, Rockingham County. For the record, the ZIP ledger entered against Randolph County, North Carolina includes: 27233, 27248, 27263, 27298, 27316, 27317, 27341, 27350, 27355, 27370.
Is Randolph County, North Carolina's climate hard on heating and cooling systems?
Count the year from the equipment's side in Randolph County, North Carolina: a long run of heating calls through 68.4 freezing nights, a long run of cooling calls through 33.3 hot days, and humidity work in the wet stretches that 43.95 inches of yearly precipitation produce. The heating profile named on this page is the summary of that count — which workload arrives first, stays longest, and wears the county's systems down fastest. For the record, Randolph County, North Carolina covers 782.336 square miles, about 500,695 acres, its centre entered at 35.709915, -79.806215, south of the Greensboro metro's centre. For the record, Randolph County, North Carolina's places are entered as name and population: Asheboro 27,353; Archdale 11,992; Trinity 7,066; Randleman 4,611. The map around Randolph County, North Carolina is entered as: Guilford County, Rockingham County.
What fills an HVAC technician's diary in Randolph County, North Carolina?
The honest answer is the metro's answer, localised. Randolph County, North Carolina sits inside the Greensboro metro, whose page ranks its problems from public data; the leader there, the refrigerant transition reaching older systems, leads here too. What the county adds is emphasis: a heating-profile county leans its share of the diary toward the season and the systems its climate record presses hardest, as the narrative above sets out. The county's own map reads: Asheboro 27,353; Archdale 11,992; Trinity 7,066; Randleman 4,611 — name and population, place by place. The county's geography, as recorded: 782.336 square miles (about 500,695 acres), a centre at 35.709915, -79.806215, south of the Greensboro metro's centre. On the county's own record, one run of the ZIP ledger reads: 27233, 27248, 27263, 27298, 27316, 27317, 27341, 27350, 27355, 27370.
Which months matter most for heating and cooling in Randolph County, North Carolina?
Read the seasons off the county's ground as well as its sky. Across 782 square miles — 65.2 square miles per ZIP code — the peak weeks arrive everywhere at once, from 27203 through to 27370. That simultaneity is what makes the peak busy: not one street's systems failing, but a county's worth of them reaching the same hot or cold week together. The shoulder weeks before it are the booking window. Beside Randolph County, North Carolina on the record stand: Guilford County, Rockingham County. The county's own ZIP list includes this run: 27233, 27248, 27263, 27298, 27316, 27317, 27341, 27350, 27355, 27370. On the county's own record, the places ledger reads, populations included: Asheboro 27,353; Archdale 11,992; Trinity 7,066; Randleman 4,611.
Am I hiring TempReach USA or a local technician in Randolph County, North Carolina?
The arrangement is stated in the county's own terms. This page publishes Randolph County, North Carolina's homework — its record at PIEDMONT TRIAD INTL AP, NC US, its heating pressure, its place inside the Greensboro metro — and the call routes onward from that homework to an independent technician serving the county. Two roles, kept separate on purpose: publisher and router here, practitioner there. A run from the county's code ledger, as recorded: 27233, 27248, 27263, 27298, 27316, 27317, 27341, 27350, 27355, 27370. For the record, the counties entered beside Randolph County, North Carolina include: Guilford County, Rockingham County. On the county's own record, the ground is entered as 782.336 square miles — about 500,695 acres — centred at 35.709915, -79.806215, south of the Greensboro metro's centre.
Why does Randolph County, North Carolina have its own page as well as a metro page?
This page adds the county's own measurements. The metro page cannot tell you that your county runs to 782 square miles at 65.2 square miles per ZIP code, that its codes open at 27203, or that it lies south of the Greensboro metro's centre, roughly 24 miles out. Those are county facts, and they are the layer between the metro's ranking and your own address — which is the layer this page exists to carry. For the record, the ZIP ledger entered against Randolph County, North Carolina includes: 27233, 27248, 27263, 27298, 27316, 27317, 27341, 27350, 27355, 27370. Entered by ground: 782.336 square miles of North Carolina, about 500,695 acres, centred at 35.709915, -79.806215, roughly 24 miles from the metro centre it is measured against. Entered under Randolph County, North Carolina's name, the place ledger runs, populations attached: Asheboro 27,353; Archdale 11,992; Trinity 7,066; Randleman 4,611.

Our role in Randolph County, stated plainly

TempReach USA is not an HVAC company. We employ no heating or cooling technicians, we run no service trucks, and we do not carry out HVAC work of any kind. This website and its call center exist for one purpose: to connect homeowners with independent local heating and cooling professionals who serve their area. When you call the number on this site, your call is routed to such a professional. From that point, everything about the job belongs to that professional and to you: the assessment, the work itself, the scheduling, what you are charged, and the terms of any agreement you reach. The professional who takes your job is solely responsible for it. The technician who arrives at your home runs their own business; they are not an employee, agent or subcontractor of TempReach USA. Our part is the information on these pages — assembled from Census Bureau housing data and NOAA climate records for each metro — and the routing of your call. We state this plainly on purpose: you should know exactly who you are hiring before anyone picks up a wrench or a gauge.

Talk to an HVAC technician in Randolph County

One call connects you with an independent local heating and cooling professional serving Randolph County and the Greensboro metro.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

Call Now