Home / Counties / North Carolina / Madison County

Madison County Heating & Cooling Services

One county, read on its own ground: Madison County, North Carolina — 0 communities, 3 ZIP codes, 2 neighbouring counties, inside the Asheville metro. TempReach USA connects you with an independent local HVAC technician serving the county, and this page is the homework behind the connection.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

450
Square miles of land
3
ZIP codes in the county
3,879
Heating degree days
1,092
Cooling degree days

Madison County heating & cooling, in brief

Madison County covers 450 square miles in North Carolina. Its climate is read from the normals recorded at ASHEVILLE, NC US — 3,879 heating degree days against 1,092 cooling degree days — and its dominant pressure is a heating one. TempReach USA is a referral service, not an HVAC company: one call connects you with an independent local HVAC technician serving the county.

The Madison County climate record

Before the narrative, the numbers themselves, because everything after them is commentary: at ASHEVILLE, NC US, the station whose NOAA 1991-2020 normals this county is read through, an average year holds 15.7 days at 90 degrees or above, 76.9 nights at or below freezing, 40.61 inches of precipitation and degree-day totals of 3,879 heating against 1,092 cooling. Spread over 450 square miles, with the county's centroid north of the Asheville metro's centre and roughly 20 miles from the centre it is measured against, that record is Madison County's working climate.

Heating writes this county's HVAC calendar. With 3,879 heating degree days against 1,092 cooling degree days in the normals recorded at ASHEVILLE, NC US, the systems across Madison County earn their keep in the cold half of the year: furnaces and heat pumps cycling through 76.9 nights at or below freezing, when a breakdown stops being a comfort problem and becomes a household one. The pressure shows up as midwinter failures on the oldest equipment first, and a maintenance calendar that has to be kept in autumn — because by the time the cold arrives, the county's systems are already on stage.

Distance is the county fact the climate table leaves out. Madison County's centroid lies north of the Asheville metro's centre, roughly 20 miles from the centre it is measured against, and that distance is travelled on every call routed here — out through the metro's nearer counties and into this one's 3 ZIP codes. Local knowledge in a county like this is partly a map held in the head: which roads, which communities, which end of the county a call is coming from.

Routing in Madison County is written in five digits. The county's codes begin at 28743 and run to 28754, 3 in total, and between the first and the last sits the county's full spread of ground — 450 square miles from the metro-facing edge to the far side. A technician's week here is a tour of those codes, and the tour is also a tour of the county's building history, because each code's systems were largely fitted when that code's streets were built.

Position first: Madison County lies north of the Asheville metro's centre, roughly 20 miles from the metro's centre as the map measures it, with Buncombe County, Henderson County among the counties around it. Neighbourhood at county scale matters to heating and cooling because systems do not respect the border — the same subdivisions' building decades continue across it, the same cold snaps and heat waves examine both sides in the same night — while each county's page, this one included, keeps the local figures distinct.

Two numbers organise Madison County's heating and cooling year: 3,879 and 1,092, the heating and cooling degree days in the normals at ASHEVILLE, NC US. Whichever runs larger decides the county's dominant pressure — here, a heating one — and with it the season a household should prepare for first. The supporting figures fill in the texture: 57.3 degrees as the year's average temperature, 15.7 hot days, 76.9 freezing nights, 40.61 inches of precipitation. Every paragraph on this page is, in the end, a reading of those six numbers on this county's ground.

Communities and housing in Madison County

Hold Madison County up against its own neighbours and the missing place list stops looking like a gap. Buncombe County, Henderson County are among the 2 counties around it; some of them are lists of named towns, this one is 450 square miles of ground lying north of the Asheville metro's centre, roughly 20 miles out. Its communities exist — people live in them, heat them, cool them — but the record reaches them through the county's ZIP codes rather than through names, and this page follows the record's way of seeing.

Ownership writes part of the diary too. Across the Asheville metro, 68.2% of households own their homes, and owner-occupiers and landlords keep different maintenance calendars — owners tending to plan replacements in the shoulder seasons, rented homes more often meeting their systems at the point of failure. Madison County shares that metro pattern across its 3 ZIP codes and its listed communities, and it shows in the timing of the calls as much as in their content: planned work where the owners live, urgent work where they do not.

One way to hold Madison County in mind is as the local layer of a wider dataset. Above it sits the Asheville metro, with its Census housing profile and its NOAA station at ASHEVILLE, NC US. At this level sit the county's own numbers — 450 square miles, 2 neighbouring counties, 3 ZIP codes, 0 listed places — and below it, not published anywhere, sit the individual homes whose systems all of it describes. This page works at the middle level, where the data is still local enough to act on.

Metro areas covering Madison County

City pages carry the metro-wide homework — housing eras, the problem ranking, services in depth. This county sits inside their coverage.

Heating & cooling services in Madison County

Communities in Madison County

Madison County ZIP codes

28743, 28753, 28754

Neighbouring counties

Madison County heating & cooling questions

What parts of Madison County, North Carolina are inside TempReach USA's coverage?
Coverage is measured on this page in three units at once: land, codes and communities. The land is 450 square miles of North Carolina; the codes run 3 in total, opening at 28743 and 28753; the communities number 0 on the record. A home that matches any one of those three measures sits inside the county ground this page describes, north of the Asheville metro's centre. The county's geography, as recorded: 449.615 square miles (about 287,754 acres), a centre at 35.864206, -82.712631, north of the Asheville metro's centre. On the county's own record, the neighbor ledger names: Buncombe County, Henderson County. The county's own ZIP list includes this run: 28743, 28753, 28754.
Is Madison County, North Carolina's climate hard on heating and cooling systems?
More than homeowners usually expect. A system in Madison County, North Carolina does not live in an average climate; it lives in the record kept at ASHEVILLE, NC US — an average temperature of 57.3 degrees, built from 15.7 hot days and 76.9 freezing nights. The heating plant answers one end of that record, the cooling plant the other, and the county's dominant pressure, described above, is simply the two ends weighed against each other. Beside Madison County, North Carolina on the record stand: Buncombe County, Henderson County. On the county's own record, the ground is entered as 449.615 square miles — about 287,754 acres — centred at 35.864206, -82.712631, north of the Asheville metro's centre. For the record, the ZIP ledger entered against Madison County, North Carolina includes: 28743, 28753, 28754.
Which HVAC calls are most common across Madison County, North Carolina?
The leader is the refrigerant transition reaching older systems, and the county's own numbers explain its lead. A heating-profile county lying north of the Asheville metro's centre asks its equipment for one workload above the others, recorded at ASHEVILLE, NC US as 15.7 hot days and 76.9 freezing nights in an average year. The metro page carries the full ranking; this page carries the reason the ranking bends toward that workload here. For the record, the counties entered beside Madison County, North Carolina include: Buncombe County, Henderson County. On the county's own record, one run of the ZIP ledger reads: 28743, 28753, 28754. Entered by ground: 449.615 square miles of North Carolina, about 287,754 acres, centred at 35.864206, -82.712631, roughly 20 miles from the metro centre it is measured against.
Before which peak should a Madison County, North Carolina household book its HVAC maintenance?
The taller peak is the heating one, and the calendar is built backwards from it. In Madison County, North Carolina the record at ASHEVILLE, NC US counts 15.7 hot days against 76.9 freezing nights; whichever side a household's system belongs to, its check belongs in the quiet weeks ahead of that side's peak, while the county's 3 ZIP codes are not all calling in the same week. A run from the county's code ledger, as recorded: 28743, 28753, 28754. For the record, Madison County, North Carolina covers 449.615 square miles, about 287,754 acres, its centre entered at 35.864206, -82.712631, north of the Asheville metro's centre. The map around Madison County, North Carolina is entered as: Buncombe County, Henderson County.
Am I hiring TempReach USA or a local technician in Madison County, North Carolina?
The arrangement is stated in the county's own terms. This page publishes Madison County, North Carolina's homework — its record at ASHEVILLE, NC US, its heating pressure, its place inside the Asheville metro — and the call routes onward from that homework to an independent technician serving the county. Two roles, kept separate on purpose: publisher and router here, practitioner there. The county's geography, as recorded: 449.615 square miles (about 287,754 acres), a centre at 35.864206, -82.712631, north of the Asheville metro's centre. The county's own ZIP list includes this run: 28743, 28753, 28754. On the county's own record, the neighbor ledger names: Buncombe County, Henderson County.
Should I start with the Madison County, North Carolina page or the Asheville metro page for my home?
Start where your address sits. A home in Madison County, North Carolina lives inside the Asheville metro's data but on this county's ground: 3 ZIP codes, 2 neighbouring counties on its record, and a climate read from ASHEVILLE, NC US applied to 450 square miles rather than to a whole metro. Read this page for standing, the metro page for depth, and follow the links between them in whichever order you arrived. The county's own ZIP list includes this run: 28743, 28753, 28754. On the county's own record, the neighbor ledger names: Buncombe County, Henderson County. The county's geography, as recorded: 449.615 square miles (about 287,754 acres), a centre at 35.864206, -82.712631, north of the Asheville metro's centre.

Our role in Madison County, stated plainly

TempReach USA is not an HVAC company. We employ no heating or cooling technicians, we run no service trucks, and we do not carry out HVAC work of any kind. This website and its call center exist for one purpose: to connect homeowners with independent local heating and cooling professionals who serve their area. When you call the number on this site, your call is routed to such a professional. From that point, everything about the job belongs to that professional and to you: the assessment, the work itself, the scheduling, what you are charged, and the terms of any agreement you reach. The professional who takes your job is solely responsible for it. The technician who arrives at your home runs their own business; they are not an employee, agent or subcontractor of TempReach USA. Our part is the information on these pages — assembled from Census Bureau housing data and NOAA climate records for each metro — and the routing of your call. We state this plainly on purpose: you should know exactly who you are hiring before anyone picks up a wrench or a gauge.

Talk to an HVAC technician in Madison County

One call connects you with an independent local heating and cooling professional serving Madison County and the Asheville metro.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

Call Now