The county-level homework for Hillsborough County, New Hampshire — its 877 square miles, its 34 ZIP codes, its place inside the Manchester metro's coverage. TempReach USA connects homeowners here with independent local HVAC technicians; the record behind the routing is on this page.
Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET
Hillsborough County in one paragraph: 877 square miles in New Hampshire, 34 ZIP codes, a heating climate pressure read from the normals at MANCHESTER AP, NH US, and housing that answers 6,172 heating degree days against 773 cooling degree days a year. TempReach USA is a referral service, not an HVAC company — one call connects you with an independent local HVAC technician serving this county.
The station for this county's metro is MANCHESTER AP, NH US, and its NOAA 1991-2020 normals are the source of every figure in this section. Precipitation averages 40.39 inches a year; the temperature record averages 50.1 degrees, built from 16.2 days at 90 or above and 129.1 nights at or below freezing; the workload totals 6,172 heating degree days and 773 cooling degree days. Hillsborough County is read through that record throughout this page.
Heating writes this county's HVAC calendar. With 6,172 heating degree days against 773 cooling degree days in the normals recorded at MANCHESTER AP, NH US, the systems across Hillsborough County earn their keep in the cold half of the year: furnaces and heat pumps cycling through 129.1 nights at or below freezing, when a breakdown stops being a comfort problem and becomes a household one. The pressure shows up as midwinter failures on the oldest equipment first, and a maintenance calendar that has to be kept in autumn — because by the time the cold arrives, the county's systems are already on stage.
Set the county inside its metro and the picture completes. Hillsborough County answers to the Manchester metro's data — its housing profile, its problem ranking, its climate station — but the county is where that data touches ground: 14 communities, 34 ZIP codes, one county's worth of systems ageing under the record kept at MANCHESTER AP, NH US. This page is that ground-level reading, kept separate from the metro page so the local detail is never averaged away.
Routing in Hillsborough County is written in five digits. The county's codes begin at 03031 and run to 03458, 34 in total, and between the first and the last sits the county's full spread of ground — 877 square miles from the metro-facing edge to the far side. A technician's week here is a tour of those codes, and the tour is also a tour of the county's building history, because each code's systems were largely fitted when that code's streets were built.
The neighbour list for Hillsborough County is empty in the record, and the page treats that as a fact about position rather than a gap: this county sits at its own place in the Manchester metro — close to the centre of the Manchester metro, roughly 0 miles from the centre — without another covered county directly beside it on this site. Its heating and cooling story is therefore told from its own record alone: land, codes, communities and climate, with the metro page carrying the wider frame.
Extremes, not averages, fill Hillsborough County's emergency diary, and the record names them precisely: 16.2 days a year at 90 degrees or above, 129.1 nights at or below freezing. Between those figures sits the ordinary year — an average of 50.1 degrees, 40.39 inches of rain — in which systems mostly age quietly. The two ends are when ageing becomes failure, which is why the county's dominant heating pressure, the taller of its two peaks, sets the rhythm of its maintenance year as well.
Start the county at its named places: Manchester, Nashua, Milford, Hudson head a list of 14 communities recorded in Hillsborough County. The list matters to heating and cooling because communities concentrate the housing — a street of homes built in one decade produces one kind of service diary, the next community's different decade produces another — and because the roads between the named places are part of the working day here. The county page's climate record is shared; the ground it lands on is divided among these names.
Look at the second era as well as the first and Hillsborough County's stock comes into focus. After the dominant band — homes built between 1980 and 1999, 30.6% of the metro's total — the next share was built before 1960, at 29.4%. Between them those two bands account for most of the systems a technician will open in this county, and they are different machines in different houses: the earlier band's equipment fitted into older envelopes, the later band's into the standards of its own decade. The county's diary is the two bands, interleaved street by street.
One way to hold Hillsborough County in mind is as the local layer of a wider dataset. Above it sits the Manchester metro, with its Census housing profile and its NOAA station at MANCHESTER AP, NH US. At this level sit the county's own numbers — 877 square miles, 0 neighbouring counties, 34 ZIP codes, 14 listed places — and below it, not published anywhere, sit the individual homes whose systems all of it describes. This page works at the middle level, where the data is still local enough to act on.
City pages carry the metro-wide homework — housing eras, the problem ranking, services in depth. This county sits inside their coverage.
Population 115,415
Population 91,131
Population 8,857
Population 7,105
Population 5,806
Population 4,872
Population 4,586
Population 3,127
Population 2,343
Population 1,582
Population 1,444
Population 1,293
TempReach USA is not an HVAC company. We employ no heating or cooling technicians, we run no service trucks, and we do not carry out HVAC work of any kind. This website and its call center exist for one purpose: to connect homeowners with independent local heating and cooling professionals who serve their area. When you call the number on this site, your call is routed to such a professional. From that point, everything about the job belongs to that professional and to you: the assessment, the work itself, the scheduling, what you are charged, and the terms of any agreement you reach. The professional who takes your job is solely responsible for it. The technician who arrives at your home runs their own business; they are not an employee, agent or subcontractor of TempReach USA. Our part is the information on these pages — assembled from Census Bureau housing data and NOAA climate records for each metro — and the routing of your call. We state this plainly on purpose: you should know exactly who you are hiring before anyone picks up a wrench or a gauge.
One call connects you with an independent local heating and cooling professional serving Hillsborough County and the Manchester metro.
Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET