Home / Counties / North Carolina / Edgecombe County

Edgecombe County Heating & Cooling Services

One county, read on its own ground: Edgecombe County, North Carolina — 4 communities, 9 ZIP codes, 1 neighbouring counties, inside the Rocky Mount metro. TempReach USA connects you with an independent local HVAC technician serving the county, and this page is the homework behind the connection.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

505
Square miles of land
9
ZIP codes in the county
3,271
Heating degree days
1,681
Cooling degree days

Edgecombe County heating & cooling, in brief

The short version of this page: Edgecombe County runs to 505 square miles, its weather is the record kept at ROCKY MT WILSON AP, NC US — 3,271 heating degree days, 1,681 cooling degree days — and its systems live under a heating pressure. One call to TempReach USA, a referral service rather than an HVAC company, connects you with an independent local HVAC technician serving the county.

The Edgecombe County climate record

Climate on this page is not a national average wearing a county's name. It is the specific record at ROCKY MT WILSON AP, NC US: 60.5 degrees as the average temperature, 44.38 inches of precipitation, 53.5 hot days and 69.1 freezing nights in the average year, 3,271 heating degree days against 1,681 cooling degree days. Edgecombe County — 505 square miles, 9 ZIP codes, 4 listed communities — lives inside that record, and its heating and cooling systems are sized, serviced and replaced inside it too.

There is a housing arithmetic under Edgecombe County's heating season. The metro it belongs to built its largest share of homes between 1980 and 1999 — 31.4% of the stock — with the next share between 1960 and 1979 at 25.2%, around a median build year of 1983. Fitted into those eras, the county's furnaces and heat pumps meet 69.1 freezing nights at very different ages, and the heating diary divides accordingly: deep repair conversations in the older bands, first-replacement conversations in the newer ones.

Distance is the county fact the climate table leaves out. Edgecombe County's centroid lies east of the Rocky Mount metro's centre, roughly 11 miles from the centre it is measured against, and that distance is travelled on every call routed here — out through the metro's nearer counties and into this one's 9 ZIP codes. Local knowledge in a county like this is partly a map held in the head: which roads, which communities, which end of the county a call is coming from.

9 ZIP codes reach into Edgecombe County's 505 square miles, among them 27801, 27809, 27815, 27819 — an average of 56.2 square miles of county ground per code. The codes are more than a mailing grid here: they are how the county's service ground divides in practice, each code holding its own mix of housing eras, its own streets of systems ageing on their own schedules. A call in one code and a call in the next can be the same fault in different decades of house.

Edgecombe County sits alongside Nash County in the Rocky Mount area — 1 neighbouring counties share its coverage map in all, and the borders between them are lines on a map rather than changes in the weather. The same station record travels across those borders, the same housing decades appear on both sides, and a technician's ground here is really the cluster: this county and its neighbours, read together, with this page keeping Edgecombe County's own share of the picture separate.

A year in Edgecombe County, counted the way a technician counts it, is not twelve months but two workloads and the weeks between them. The first workload is written as 1,681 cooling degree days, the second as 3,271 heating degree days; 44.38 inches of precipitation fall across both, and the average temperature of 60.5 degrees is simply the figure the two workloads leave behind when they are averaged. The county's heating pressure is whichever workload the count puts first — and the maintenance year is arranged around that ordering.

Communities and housing in Edgecombe County

Edgecombe County is a county of distinct communities rather than one continuous town: Tarboro, Princeville, Pinetops and Conetoe are among the 4 places on its record, each with its own building era and its own stock of systems. Position plays its part as well — the county sits east of the Rocky Mount metro's centre, so its communities meet the Rocky Mount metro's weather at slightly different distances from the centre — but it is the place list that a service diary follows, name by name, through the year.

Age is the county's second climate. The Rocky Mount metro's median home was built in 1983, and 46.5% of its homes predate 1980 — in Edgecombe County, that share is the older districts and the long-settled communities, where ductwork from an earlier equipment era still serves replacement systems. The newer share, 22.1% built since 2000, concentrates in the county's growth edges. The service diary divides along that line: deep equipment-and-duct conversations at the old end, first-replacement and control conversations at the new one.

Coverage, for Edgecombe County, is a set of overlapping maps. The land map is 505 square miles. The address map is 9 ZIP codes and 4 listed communities. The service map is the Rocky Mount metro, whose coverage the county sits inside — east of the Rocky Mount metro's centre, roughly 11 miles from its centre. The weather map is one station's record, kept at ROCKY MT WILSON AP, NC US. A home in this county lives on all four maps at once, and its heating and cooling needs are set by the combination.

Metro areas covering Edgecombe County

City pages carry the metro-wide homework — housing eras, the problem ranking, services in depth. This county sits inside their coverage.

Heating & cooling services in Edgecombe County

Communities in Edgecombe County

Tarboro

Population 10,705

Princeville

Population 1,502

Pinetops

Population 1,323

Conetoe

Population 562

Edgecombe County ZIP codes

27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886

Neighbouring counties

Edgecombe County heating & cooling questions

Which communities in Edgecombe County, North Carolina does TempReach USA cover?
The shortest check is the ZIP list printed below. Edgecombe County, North Carolina's codes begin at 27801 and run through 27843 to 27886, at an average of 56.2 square miles of county ground per code. Find your code in that run and you have found your coverage — the same run of codes also defines the service ground a routed technician covers here. For the record, the ZIP ledger entered against Edgecombe County, North Carolina includes: 27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886. The county's own map reads: Tarboro 10,705; Princeville 1,502; Pinetops 1,323; Conetoe 562 — name and population, place by place. On the county's own record, the neighbor ledger names: Nash County.
How many hot days and freezing nights shape HVAC work in Edgecombe County, North Carolina each year?
Put the record in workload order for Edgecombe County, North Carolina: 3,271 heating degree days and 1,681 cooling degree days as the year's two totals, 53.5 days at 90 degrees or above and 69.1 nights at or below freezing at its ends, and 44.38 inches of precipitation spread across the year. A system here is sized, serviced and eventually replaced against that order — the average temperature of 60.5 degrees is only what the two workloads average out to. On the county's own record, one run of the ZIP ledger reads: 27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886. For the record, Edgecombe County, North Carolina covers 505.436 square miles, about 323,479 acres, its centre entered at 35.917077, -77.602742, east of the Rocky Mount metro's centre. For the record, the counties entered beside Edgecombe County, North Carolina include: Nash County.
Which HVAC calls are most common across Edgecombe County, North Carolina?
Count from the climate and the housing together and the diary explains itself: 3,271 heating degree days and 1,681 cooling degree days of annual load, homes spread over 505 square miles, and the metro pattern — the refrigerant transition reaching older systems — leading the list on the Rocky Mount page. The county's share of that diary concentrates where its communities concentrate: Tarboro, Princeville, Pinetops, Conetoe. A run from the county's code ledger, as recorded: 27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886. Beside Edgecombe County, North Carolina on the record stand: Nash County. For the record, Edgecombe County, North Carolina's places are entered as name and population: Tarboro 10,705; Princeville 1,502; Pinetops 1,323; Conetoe 562.
Before which peak should a Edgecombe County, North Carolina household book its HVAC maintenance?
The season is written in the record at ROCKY MT WILSON AP, NC US: 53.5 days a year at 90 degrees or more draw the cooling peak, 69.1 nights at or below freezing draw the heating peak, and Edgecombe County, North Carolina's dominant heating pressure decides which peak runs taller. Maintenance booked ahead of the taller peak — in the quiet weeks before it — is the county's standing advice, because the peak weeks are when every system in 505 square miles asks its question at once. Entered under Edgecombe County, North Carolina's name, the place ledger runs, populations attached: Tarboro 10,705; Princeville 1,502; Pinetops 1,323; Conetoe 562. The map around Edgecombe County, North Carolina is entered as: Nash County. The county's own ZIP list includes this run: 27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886.
Am I hiring TempReach USA or a local technician in Edgecombe County, North Carolina?
Two businesses, two jobs, in Edgecombe County, North Carolina as everywhere on this site. TempReach USA's job is information and routing — the county and metro pages built from Census and NOAA records, and a call center that connects you onward. The local technician's job is everything that happens at your home in Tarboro, Princeville or anywhere across the county's 505 square miles. We state the arrangement plainly on every page because it works well when nobody pretends otherwise. The county's geography, as recorded: 505.436 square miles (about 323,479 acres), a centre at 35.917077, -77.602742, east of the Rocky Mount metro's centre. On the county's own record, the places ledger reads, populations included: Tarboro 10,705; Princeville 1,502; Pinetops 1,323; Conetoe 562. For the record, the ZIP ledger entered against Edgecombe County, North Carolina includes: 27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886.
Why does Edgecombe County, North Carolina have its own page as well as a metro page?
This page adds the county's own measurements. The metro page cannot tell you that your county runs to 505 square miles at 56.2 square miles per ZIP code, that its codes open at 27801, or that it lies east of the Rocky Mount metro's centre, roughly 11 miles out. Those are county facts, and they are the layer between the metro's ranking and your own address — which is the layer this page exists to carry. Entered by ground: 505.436 square miles of North Carolina, about 323,479 acres, centred at 35.917077, -77.602742, roughly 11 miles from the metro centre it is measured against. On the county's own record, the neighbor ledger names: Nash County. For the record, the ZIP ledger entered against Edgecombe County, North Carolina includes: 27801, 27809, 27815, 27819, 27843, 27852, 27864, 27881, 27886.

Our role in Edgecombe County, stated plainly

TempReach USA is not an HVAC company. We employ no heating or cooling technicians, we run no service trucks, and we do not carry out HVAC work of any kind. This website and its call center exist for one purpose: to connect homeowners with independent local heating and cooling professionals who serve their area. When you call the number on this site, your call is routed to such a professional. From that point, everything about the job belongs to that professional and to you: the assessment, the work itself, the scheduling, what you are charged, and the terms of any agreement you reach. The professional who takes your job is solely responsible for it. The technician who arrives at your home runs their own business; they are not an employee, agent or subcontractor of TempReach USA. Our part is the information on these pages — assembled from Census Bureau housing data and NOAA climate records for each metro — and the routing of your call. We state this plainly on purpose: you should know exactly who you are hiring before anyone picks up a wrench or a gauge.

Talk to an HVAC technician in Edgecombe County

One call connects you with an independent local heating and cooling professional serving Edgecombe County and the Rocky Mount metro.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

Call Now