Home / Counties / North Carolina / Davie County

Davie County Heating & Cooling Services

The county-level homework for Davie County, North Carolina — its 264 square miles, its 3 ZIP codes, its place inside the Winston-Salem metro's coverage. TempReach USA connects homeowners here with independent local HVAC technicians; the record behind the routing is on this page.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

264
Square miles of land
3
ZIP codes in the county
3,497
Heating degree days
1,513
Cooling degree days

Davie County heating & cooling, in brief

The short version of this page: Davie County runs to 264 square miles, its weather is the record kept at WINSTON SALEM RYNLDS AP, NC US — 3,497 heating degree days, 1,513 cooling degree days — and its systems live under a heating pressure. One call to TempReach USA, a referral service rather than an HVAC company, connects you with an independent local HVAC technician serving the county.

The Davie County climate record

One record, one county: the normals at WINSTON SALEM RYNLDS AP, NC US — 3,497 heating degree days, 1,513 cooling degree days, 43.2 inches of precipitation, an average temperature of 59.5 degrees — applied to Davie County's own 264 square miles and its 3 ZIP codes. The figures are the Winston-Salem metro's; the ground they are applied to, lying southwest of the Winston-Salem metro's centre, is this county's alone, and this section reads the two together.

Count the cold from the ground up in Davie County and the figures arrange themselves: 3,497 heating degree days against 1,513 cooling degree days, 63.6 freezing nights in an average year, and a housing stock spread over 264 square miles whose heating plant was fitted in the decades its communities were built. The diary that follows is written street by street — ignition and exchanger work where the stock is oldest, control and sensor work where it is newest — and the county's technicians read the address before they read the fault.

The county's neighbours frame it as well: Davidson County, Forsyth County, Stokes County are among the 4 counties on its neighbour list, and together they form the working ground around Davie County's own 264 square miles. A system near a shared border lives in both counties' weather at once, whichever page describes its home — the pages divide the map so the record can be read county by county, and the links between them keep the whole in view.

A ZIP code in Davie County is a small climate-and-housing district of its own. The county's 3 codes — 27006, 27014, 27028 among them — all read the same normals from WINSTON SALEM RYNLDS AP, NC US, yet the systems inside them were installed in different decades, serve different house sizes, and fail in different orders. That is why this page prints the whole list rather than a summary: the codes are the finest division of the county the data supports, and they are the division the work itself follows.

The counties around Davie County include Davidson County, Forsyth County, Stokes County, and the whole group shares the Winston-Salem metro's climate record from WINSTON SALEM RYNLDS AP, NC US. What the neighbours do not share is this county's ground: 264 square miles, 3 ZIP codes, a centroid southwest of the Winston-Salem metro's centre. Service patterns cross the county line freely — a cold week fills diaries on both sides of it — but the mix of housing and systems on each side is its own, which is why each county in the group carries its own page.

Consider what one year asks of a system in Davie County: a cooling season measured at 1,513 degree days, a heating season at 3,497, 32.8 days of serious heat and 63.6 freezing nights, and 43.2 inches of precipitation working on every outdoor unit through all of it. No single figure is remarkable; the combination is the county's climate, and it is the combination a system has to survive for fifteen or twenty years. The service patterns described on this page are that arithmetic, playing out across 264 square miles of housing.

Communities and housing in Davie County

Davie County's named places — Mocksville — anchor a county that is mostly ground between names: 264 square miles, 3 ZIP codes, and housing that follows the roads more than the towns. The wider metro it belongs to is anchored by Winston-Salem (250,887 residents) and Kernersville, but this county's own diary is quieter and more spread out: individual systems in individual houses, ageing on the schedule of the decade each house was built, from the named communities outward.

Ownership writes part of the diary too. Across the Winston-Salem metro, 68.5% of households own their homes, and owner-occupiers and landlords keep different maintenance calendars — owners tending to plan replacements in the shoulder seasons, rented homes more often meeting their systems at the point of failure. Davie County shares that metro pattern across its 3 ZIP codes and its listed communities, and it shows in the timing of the calls as much as in their content: planned work where the owners live, urgent work where they do not.

Put the county's coverage facts in one place and they read like this: 264 square miles of land in North Carolina, 1 listed communities, 3 ZIP codes, 4 neighbouring counties on the record, and a place inside the Winston-Salem metro coverage. No single figure describes the county; the set of them does, and it is the set this page is organised around, from the climate record above to the community and ZIP lists below.

Metro areas covering Davie County

City pages carry the metro-wide homework — housing eras, the problem ranking, services in depth. This county sits inside their coverage.

Heating & cooling services in Davie County

Communities in Davie County

Mocksville

Population 6,001

Davie County ZIP codes

27006, 27014, 27028

Neighbouring counties

Davie County heating & cooling questions

What parts of Davie County, North Carolina are inside TempReach USA's coverage?
Start with the communities named on this page: Mocksville and the rest of Davie County, North Carolina's 1 listed places, across 3 ZIP codes. If your address sits in one of them, it sits inside the footprint this county page describes — its climate record, its service pressures, its metro links — and inside the routing area of the local professionals TempReach USA connects callers to. For the record, the counties entered beside Davie County, North Carolina include: Davidson County, Forsyth County, Stokes County, Yadkin County. For the record, Davie County, North Carolina's places are entered as name and population: Mocksville 6,001. The county's geography, as recorded: 263.699 square miles (about 168,767 acres), a centre at 35.929355, -80.542552, southwest of the Winston-Salem metro's centre.
What does the weather record mean for HVAC systems in Davie County, North Carolina?
More than homeowners usually expect. A system in Davie County, North Carolina does not live in an average climate; it lives in the record kept at WINSTON SALEM RYNLDS AP, NC US — an average temperature of 59.5 degrees, built from 32.8 hot days and 63.6 freezing nights. The heating plant answers one end of that record, the cooling plant the other, and the county's dominant pressure, described above, is simply the two ends weighed against each other. A run from the county's code ledger, as recorded: 27006, 27014, 27028. Entered under Davie County, North Carolina's name, the place ledger runs, populations attached: Mocksville 6,001. The map around Davie County, North Carolina is entered as: Davidson County, Forsyth County, Stokes County, Yadkin County.
Which heating and cooling fault leads the diary for Davie County, North Carolina homes?
The county shares its metro's ranking: the Winston-Salem metro page, linked from this page, puts the refrigerant transition reaching older systems at the top of its list, scored from the metro's Census housing profile and the climate normals recorded at WINSTON SALEM RYNLDS AP, NC US. Inside Davie County, North Carolina the same pattern holds, weighted by the county's own dominant pressure — the narrative section above describes how the heating profile bends the metro's list toward this county's ground. On the county's own record, one run of the ZIP ledger reads: 27006, 27014, 27028. On the county's own record, the neighbor ledger names: Davidson County, Forsyth County, Stokes County, Yadkin County. On the county's own record, the ground is entered as 263.699 square miles — about 168,767 acres — centred at 35.929355, -80.542552, southwest of the Winston-Salem metro's centre.
Is there an HVAC season in Davie County, North Carolina, or is it year-round?
Read the seasons off the county's ground as well as its sky. Across 264 square miles — 87.9 square miles per ZIP code — the peak weeks arrive everywhere at once, from 27006 through to 27028. That simultaneity is what makes the peak busy: not one street's systems failing, but a county's worth of them reaching the same hot or cold week together. The shoulder weeks before it are the booking window. For the record, the ZIP ledger entered against Davie County, North Carolina includes: 27006, 27014, 27028. Entered by ground: 263.699 square miles of North Carolina, about 168,767 acres, centred at 35.929355, -80.542552, roughly 14 miles from the metro centre it is measured against. Beside Davie County, North Carolina on the record stand: Davidson County, Forsyth County, Stokes County, Yadkin County.
Does TempReach USA have its own technicians in Davie County, North Carolina?
An independent local professional, routed to your address in Davie County, North Carolina. The county's ground — 264 square miles, 3 ZIP codes running from 27006 to 27028 — is served by professionals who work that ground as their own businesses. TempReach USA's part is the page you are reading and the connection that follows it; the visit, the assessment and the work are theirs. For the record, Davie County, North Carolina covers 263.699 square miles, about 168,767 acres, its centre entered at 35.929355, -80.542552, southwest of the Winston-Salem metro's centre. On the county's own record, the places ledger reads, populations included: Mocksville 6,001. The county's own ZIP list includes this run: 27006, 27014, 27028.
How does this Davie County, North Carolina page relate to the Winston-Salem city page?
The metro page is the wide lens; this page is the local one. Davie County, North Carolina is one of the counties the Winston-Salem metro is drawn from, and its 1 listed communities each sit inside that metro's coverage. What the county page adds is the ground truth at county scale — land area, the place list, the climate normals recorded at WINSTON SALEM RYNLDS AP, NC US read for this county alone — plus the neighbouring counties, linked below, whose pages do the same for their ground. For the record, the counties entered beside Davie County, North Carolina include: Davidson County, Forsyth County, Stokes County, Yadkin County. On the county's own record, the ground is entered as 263.699 square miles — about 168,767 acres — centred at 35.929355, -80.542552, southwest of the Winston-Salem metro's centre. On the county's own record, one run of the ZIP ledger reads: 27006, 27014, 27028.

Our role in Davie County, stated plainly

TempReach USA is not an HVAC company. We employ no heating or cooling technicians, we run no service trucks, and we do not carry out HVAC work of any kind. This website and its call center exist for one purpose: to connect homeowners with independent local heating and cooling professionals who serve their area. When you call the number on this site, your call is routed to such a professional. From that point, everything about the job belongs to that professional and to you: the assessment, the work itself, the scheduling, what you are charged, and the terms of any agreement you reach. The professional who takes your job is solely responsible for it. The technician who arrives at your home runs their own business; they are not an employee, agent or subcontractor of TempReach USA. Our part is the information on these pages — assembled from Census Bureau housing data and NOAA climate records for each metro — and the routing of your call. We state this plainly on purpose: you should know exactly who you are hiring before anyone picks up a wrench or a gauge.

Talk to an HVAC technician in Davie County

One call connects you with an independent local heating and cooling professional serving Davie County and the Winston-Salem metro.

Call center hours: Mon-Fri 7:00 AM-10:00 PM ET | Sat 8:00 AM-10:00 PM ET | Sun 7:00 AM-9:00 PM ET

Call Now